The Environmental Protection Agency has removed one hazardous-air-pollutant limit for process wastewater at new major PVC and copolymer plants. Its final rule, effective Monday, also removes testing, monitoring, recordkeeping and reporting duties tied to that limit.
What changes
The removed limit covered total non-vinyl-chloride organic hazardous air pollutants from process wastewater. EPA says the existing vinyl chloride emissions limit for new major sources will instead act as a surrogate for those other pollutants. The agency is not revising that vinyl chloride limit in this rule.
This is a narrower decision than EPA's broader 2020 reconsideration proposal. The agency says it is not yet deciding whether to remove the same non-vinyl-chloride wastewater limit for existing major sources, revise vinyl chloride limits for new and existing major sources, or remove associated requirements for existing sources. Those questions remain for a later action. New affected sources that began construction after May 20, 2011, must meet the finalized requirements by November 9, 2026, or when they start up, whichever is later.
What EPA expects
EPA says no new PVC source has become operational since its 2012 rule and it knows of none currently subject to this rule. It therefore expects no immediate change in emissions, costs or human-health impacts from this decision. Those are the agency's projections, not measurements of a new facility's emissions.
If a new major PVC plant becomes operational, EPA estimates the removed testing and administrative duties would save its operator about $2,900 in startup costs and $30,000 each year, in 2025 dollars. EPA says it does not expect this rule to change the potential vinyl chloride or other covered hazardous-pollutant emissions at such a source because the vinyl chloride limit remains. The rule does not establish what exposure a nearby community would face if a plant is built.

